10-Bay ATX Silver Computer Case General Features: Silver case Power switch Reset switch Power LED Hard drive LED Two (2) USB ports on front of case Microphone and headphone jacks on front of case 24-pin power supply Power supply supports Intel Pentium 4 and AMD Athlon XP Bubble columns (bubbles stationary) on either side of the drive... ...bays which glow blue when the system is on! (Lights powered... ...by a pass-through 4-pin Molex connector.) See-through side panel window with fan and power supply... ...fan that emits a bright blue light. Drive Bay Features: Four (4) 5.25-inch external drive bays Two (2) 3.5-inch external drive bays Four (4) 3.5-inch internal drive bays Expansion Features: Seven (7) punchout expansion slots Supported Form Factors: ATX Baby AT Mini ATX Micro ATX Case Fan Supply Support: One (1) 80mm case fan on side panel window (pre-installed) One (1) 80mm case fan on back (not included) Power Supply Features: 24-pin 450-watt power 115v-230v manual switch 100-127V @50/60Hz 200-240V @50/60Hz +3.3V/26A +5V/35A +12V/15A -5V/0.5A -12V/0.8A +5Vsb/2.0A Case Dimensions: 16.5 x 8 x 19.5-inches (H x W x D)

5.25-inch USB 2.0/FireWire aluminum external drive case General Features: Aluminum silver design External case Accommodates 5.25-inch IDE drives Supports ATA, PIO, ATAPI, DMA and UDMA modes USB 2.0 interface (Backwards compatible with USB 1.0) FireWire interface Up to 480 Mbps data transfer rate Built-in 1.5-inch fan Hot Swappable Supports Wake-Up Plug and Play On/Off button 12V DC plug Unit Dimensions: 2 x 6.25 x 10-inches (H x W x D) Regulatory Approvals: CE FCC

4-Bay mATX Charcoal Black Computer Case General Features: Charcoal Black case design Front case lights up blue neon light Molded plastic top handle Power button Reset button Two (2) USB ports at front of case Front headphone and microphone jacks Space saving design with matching stands Drive Bay Features: One (1) 5.25-inch external drive bay One (1) 3.5-inch external drive bay Two (2) 3.5-inch internal drive bays Expansion Features: Four (4) punchout expansion slots Supported Form Factors: mATX Case Supply Support: Two (2) 60 mm fans on back of case (Not included) Power Supply Features: Model: LP6100A 230-watt power supply 115v-230v manual switch Power Supply Input: 115-230 VAC, 50-60 Hz, 3A/2.5A Power Supply Output: +5V,18A +3.3V,10A -12V, 0.8A +12V, 7A +5Vsb, 2A +5V and +3.3V total output = 123W Available Power Supply Connectors: 20-pin ATX power connector (for use with motherboards requiring a 24-pin ATX connector, please use an adapter cable.) 4-pin ATX12V power connector Three (3) large 4-pin Molex drive power connectors One (1) small 4-pin drive power connector Case Dimensions: 15.5 x 5.25 x 14-inches (H x W x D)

Metal Gear Box 3.5-Inch USB / IEEE 1394 FireWire Hard Drive Case with LEDs General Features: Black Case Enclosure USB 2.0 interface (backwards compatible) IEEE 1394 FireWire interface Fits any 3.5-inch hard drive Blue LEDs light up the stand! E-IDE/ATAPI interface 480 Mbps maximum data transfer (USB 2.0) 400 Mbps maximum data transfer (IEEE 1394 FireWire) Hot swappable PC and Macintosh compatible Rear Panel Features: One (1) USB 2.0 port Two (2) IEEE 1394 FireWire 6-pin ports Power switch DC input Regulatory Approvals: FCC CE VCCI

3.5" USB 2.0 One Button Backup External Drive Enclosure General Features: Silver case USB 2.0 interface (backwards compatible) One button backup Prolific PL2506 chipset 480 Mbps maximum data transfer Fits any 3.5-inch hard drive Plug and Play Hot swappable PC and Macintosh compatible Front Panel Features: Power OBC Rear Panel Features: One (1) USB 2.0 port Power plug Regulatory Approvals: FCC CE

Main SpecificationsProduct DescriptionAntec fan unitProduct TypeFan unit - 40 mm x 40 mm (approx 1.6 x 1.6 inches)FeaturesBall bearingProduct MaterialPlasticColorBlackDimensions (WxDxH)1.6 in x 1.6 in x 0.8 inWeight1.1 ozGeneralProduct TypeFan unitProduct MaterialPlasticWidth1.6 inDepth1.6 inHeight0.8 inWeight1.1 ozColorBlackFanFan Height20 mmRotation Speed2200 rpmAir Flow (Total)6.5 cfmPower Connector4 pinFeaturesBall bearingSystem Fan Diameter40 mmEnvironmental ParametersSound Emission26 dBA

Main SpecificationsProduct DescriptionAOpen H 500A - mid tower - ATXForm FactorMid towerDimensions (WxDxH)7.9 in x 17.3 in x 16.3 inWeight16.5 lbsSupported Mainboard Form FactorATXSystem Cabinet FeaturesChassis Air Guide (CAG) 1.1ColorGrayPower Provided350 WattGeneralForm FactorMid towerSupported Mainboard Form FactorATXInternal Bays Qty1Front Accessible Bays Qty6Width7.9 inDepth17.3 inHeight16.3 inWeight16.5 lbsColorGrayFansRear : 2 x 8 cm - ( 0 installed)System Cabinet FeaturesChassis Air Guide (CAG) 1.1Expansion / ConnectivityExpansion Bays Total (Free)4 ( 4 ) x front accessible - 5.25" 2 ( 2 ) x front accessible - 3.5" 1 ( 1 ) x internal - 3.5"Expansion Slots Total (Free)7 expansion slot - full-lengthInterfaces2 x Hi-Speed USB - 4 pin USB Type A 1 x headphones - output - mini-phone stereo 3.5 mm 1 x microphone - input - mini-phone 3.5 mmMiscellaneousCompliant StandardsFCC Class B certified, CE, CSA, ULPowerPower DevicePower supplyPower Provided350 Watt

3.5-Inch USB 2.0 External IDE Drive Enclosure General Features: Silver and Black Color Scheme Supports 3.5-Inch IDE drives USB 2.0 compatible Up to 480 Mbps data transfer rate Hot-Swappable Plug and Play Supports up to 240 GB maximum hard drive capacity Easy-to-Open design Supported Operating Sytems: Microsoft Windows 98SE/ME/2000/XP Mac OS 8.6 or higher Regulatory Approvals: FCC CE

1.8-Inch USB 2.0 External Aluminum Case General Features: Green aluminum case design USB 2.0 interface (USB 1.1 compatible) Up to 480 Mbps data transfer speed BUS powered Plug and Play Hot-swappable Magnetism proof Shock proof Super thin, easy to carry design Supports high-capacity drives Unit Dimensions: 3 3/8 x 2 3/4 x 2 5/8-inches (L x W x H) Regulatory Approvals: FCC CE

2.5-Inch USB 2.0 Drive Enclosure General Features: Black Case Supports 2.5-inch IDE drives up to 14mm thick (handles thinner drives too) USB 2.0 compatible (Backwards compatible with USB 1.1) Up to 480 Mbps data transfer rate Hot-Swappable Plug and Play Complies with ATA/ATAPI-6 Supports 16-bit multiword DMA mode and Ultra DMA mode interface No Max Hard Drive RPM Easy-to-Open design Regulatory Approvals: FCC CE